Cylul007 Webshell
Server :
Linux ip-148-66-134-25.ip.secureserver.net 3.10.0-1160.119.1.el7.tuxcare.els10.x86_64 #1 SMP Fri Oct 11 21:40:41 UTC 2024 x86_64
php :
8.0.30
on
cgi-fcgi
Time
25 Nov 2024 18:03:41
Current Directory :
/
lib
/
rpm
/
Upload File :
Mass Deface
Home
Bypass Passwd
Current File : //lib/rpm/macros
#/*! \page config_macros Default configuration: /usr/lib/rpm/macros # \verbatim # # This is a global RPM configuration file. All changes made here will # be lost when the rpm package is upgraded. Any per-system configuration # should be added to /etc/rpm/macros, while per-user configuration should # be added to ~/.rpmmacros. # #============================================================================== # Macro naming conventions (preliminary): # # Macros that begin with an underscore are "local" in the sense that # they (if used) will not be exported in rpm headers. Some macros # that don't start with an underscore (but look like they should) # are compatible with macros generated by rpm-2.5.x and will be made # more consistent in a future release. # #============================================================================== # ---- A macro that expands to nothing. # %nil %{!?nil} #============================================================================== # ---- filesystem macros. # %_usr /usr %_usrsrc %{_usr}/src %_var /var #============================================================================== # ---- Generally useful path macros. # %__7zip /usr/bin/7za %__awk gawk %__bzip2 /usr/bin/bzip2 %__cat /usr/bin/cat %__chgrp /usr/bin/chgrp %__chmod /usr/bin/chmod %__chown /usr/bin/chown %__cp /usr/bin/cp %__cpio /usr/bin/cpio %__file /usr/bin/file %__gpg %{_bindir}/gpg2 %__grep /usr/bin/grep %__gzip /usr/bin/gzip %__id /usr/bin/id %__id_u %{__id} -u %__install /usr/bin/install %__ln_s ln -s %__lrzip /usr/bin/lrzip %__lzip /usr/bin/lzip # Deprecated, use %__xz instead. %__lzma %__xz --format=lzma %__xz /usr/bin/xz %__make /usr/bin/make %__mkdir /usr/bin/mkdir %__mkdir_p /usr/bin/mkdir -p %__mv /usr/bin/mv %__patch /usr/bin/patch %__perl /usr/bin/perl %__python /usr/bin/python %__restorecon /sbin/restorecon %__rm /usr/bin/rm %__rsh /usr/bin/rsh %__sed /usr/bin/sed %__semodule /usr/bin/semodule %__ssh /usr/bin/ssh %__tar /usr/bin/tar %__unzip /usr/bin/unzip %__git /usr/bin/git %__hg /usr/bin/hg %__bzr /usr/bin/bzr %__quilt /usr/bin/quilt #============================================================================== # ---- Build system path macros. # %__ar ar %__as as %__cc gcc %__cpp gcc -E %__cxx g++ %__ld /usr/bin/ld %__nm /usr/bin/nm %__objcopy /usr/bin/objcopy %__objdump /usr/bin/objdump %__ranlib ranlib %__remsh %{__rsh} %__strip /usr/bin/strip # XXX avoid failures if tools are not installed when rpm is built. %__libtoolize libtoolize %__aclocal aclocal %__autoheader autoheader %__automake automake %__autoconf autoconf #============================================================================== # Conditional build stuff. # Check if symbol is defined. # Example usage: %if %{defined with_foo} && %{undefined with_bar} ... %defined() %{expand:%%{?%{1}:1}%%{!?%{1}:0}} %undefined() %{expand:%%{?%{1}:0}%%{!?%{1}:1}} # Shorthand for %{defined with_...} %with() %{expand:%%{?with_%{1}:1}%%{!?with_%{1}:0}} %without() %{expand:%%{?with_%{1}:0}%%{!?with_%{1}:1}} # Handle conditional builds. %bcond_with is for case when feature is # default off and needs to be activated with --with ... command line # switch. %bcond_without is for the dual case. # # %bcond_with foo defines symbol with_foo if --with foo was specified on # command line. # %bcond_without foo defines symbol with_foo if --without foo was *not* # specified on command line. # # For example (spec file): # # (at the beginning) # %bcond_with extra_fonts # %bcond_without static # (and later) # %if %{with extra_fonts} # ... # %else # ... # %endif # %if ! %{with static} # ... # %endif # %ifdef %{with static} # ... # %endif # %{?with_static: ... } # %{!?with_static: ... } # %{?with_extra_fonts: ... } # %{!?with_extra_fonts: ... } # # The bottom line: never use without_foo, _with_foo nor _without_foo, only # with_foo. This way changing default set of bconds for given spec is just # a matter of changing single line in it and syntax is more readable. %bcond_with() %{expand:%%{?_with_%{1}:%%global with_%{1} 1}} %bcond_without() %{expand:%%{!?_without_%{1}:%%global with_%{1} 1}} # #============================================================================== # ---- Required rpmrc macros. # Macros that used to be initialized as a side effect of rpmrc parsing. # These are the default values that can be overridden by other # (e.g. per-platform, per-system, per-packager, per-package) macros. # # The directory where rpm's configuration and scripts live %_rpmconfigdir %{getconfdir} # The directory where sources/patches will be unpacked and built. %_builddir %{_topdir}/BUILD # The interpreter used for build scriptlets. %_buildshell /bin/sh # The path to the bzip2 executable (legacy, use %{__bzip2} instead). %_bzip2bin %{__bzip2} # The location of the rpm database file(s). %_dbpath %{_var}/lib/rpm # The location of the rpm database file(s) after "rpm --rebuilddb". %_dbpath_rebuild %{_dbpath} %_keyringpath %{_dbpath}/pubkeys/ # # Path to script that creates debug symbols in a /usr/lib/debug # shadow tree. # # A spec file can %%define _find_debuginfo_opts to pass options to # the script. See the script for details. # %__debug_install_post \ %{_rpmconfigdir}/find-debuginfo.sh %{?_missing_build_ids_terminate_build:--strict-build-id} %{?_include_minidebuginfo:-m} %{?_find_debuginfo_dwz_opts} %{?_find_debuginfo_opts} "%{_builddir}/%{?buildsubdir}"\ %{nil} # Template for debug information sub-package. %debug_package \ %ifnarch noarch\ %global __debug_package 1\ %package debuginfo\ Summary: Debug information for package %{name}\ Group: Development/Debug\ AutoReqProv: 0\ %description debuginfo\ This package provides debug information for package %{name}.\ Debug information is useful when developing applications that use this\ package or when debugging this package.\ %files debuginfo -f debugfiles.list\ %defattr(-,root,root)\ %endif\ %{nil} %_defaultdocdir %{_datadir}/doc %_defaultlicensedir %{_datadir}/licenses # The path to the gzip executable (legacy, use %{__gzip} instead). %_gzipbin %{__gzip} # The Unix time of the latest kept changelog entry in binary packages. # Any older entry is not packaged in binary packages. %_changelog_trimtime 0 # The directory where newly built binary packages will be written. %_rpmdir %{_topdir}/RPMS # A template used to generate the output binary package file name # (legacy). %_rpmfilename %{_build_name_fmt} # The directory where sources/patches from a source package will be # installed. This is also where sources/patches are found when building. %_sourcedir %{_topdir}/SOURCES # The directory where the spec file from a source package will be # installed. %_specdir %{_topdir}/SPECS # The directory where newly built source packages will be written. %_srcrpmdir %{_topdir}/SRPMS # The directory where buildroots will be created. %_buildrootdir %{_topdir}/BUILDROOT # Build root path, where %install installs the package during build. %buildroot %{_buildrootdir}/%{name}-%{version}-%{release}.%{_arch} # Directory where temporaray files can be created. %_tmppath %{_var}/tmp # Path to top of build area. %_topdir %{getenv:HOME}/rpmbuild # The path to the unzip executable (legacy, use %{__unzip} instead). %_unzipbin %{__unzip} #============================================================================== # ---- Optional rpmrc macros. # Macros that are initialized as a side effect of rpmrc and/or spec # file parsing. # # The sub-directory (relative to %{_builddir}) where sources are compiled. # This macro is set after processing %setup, either explicitly from the # value given to -n or the default name-version. # #%buildsubdir # Configurable distribution information, same as Distribution: tag in a # specfile. # #%distribution # Configurable distribution URL, same as DistURL: tag in a specfile. # The URL will be used to supply reliable information to tools like # rpmfind. # # Note: You should not configure with disturl (or build packages with # the DistURL: tag) unless you are willing to supply content in a # yet-to-be-determined format at the URL specified. # #%disturl # Configurable bug URL, same as BugURL: tag in a specfile. # The URL will be used to supply reliable information to where # to file bugs. # #%bugurl # Boolean (i.e. 1 == "yes", 0 == "no") that controls whether files # marked as %doc should be installed. #%_excludedocs # The port and machine name of a FTP proxy host running TIS firewall. # #%_ftpport #%_ftpproxy # The signature to use and the location of configuration files for # signing packages with GNU gpg. # #%_gpg_name #%_gpg_path # The port and machine name of an HTTP proxy host. # #%_httpport #%_httpproxy # The PATH put into the environment before running %pre/%post et al. # %_install_script_path /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin # A colon separated list of desired locales to be installed; # "all" means install all locale specific files. # %_install_langs all # The value of CLASSPATH in build scriptlets (iff configured). # #%_javaclasspath all # Import packaging conventions from jpackage.org (prefixed with _ # to avoid name collisions). # %_javadir %{_datadir}/java %_javadocdir %{_datadir}/javadoc # A colon separated list of paths where files should *not* be installed. # Usually, these are network file system mount points. # #%_netsharedpath # (experimental) # The type of pattern match used on rpmdb iterator selectors: # "default" simple glob-like regex, periods will be escaped, # splats will have period prepended, full "^...$" match # required. Also, file path tags will use glob(7). # "strcmp" compare strings # "regex" regex(7) patterns using regcomp(3)/regexec(3) # "glob" glob(7) patterns using fnmatch(3) # %_query_selector_match default # Configurable packager information, same as Packager: in a specfile. # #%packager # Compression type and level for source/binary package payloads. # "w9.gzdio" gzip level 9 (default). # "w9.bzdio" bzip2 level 9. # "w7.xzdio" xz level 7, xz's default. # "w7.lzdio" lzma-alone level 7, lzma's default # #%_source_payload w9.gzdio #%_binary_payload w9.gzdio # Algorithm to use for generating file checksum digests on build. # If not specified or 0, MD5 is used. # WARNING: non-MD5 is backwards incompatible, don't enable lightly! # The supported algorithms may depend on NSS version, as of NSS # 3.11.99.5 the following are supported: # 1 MD5 (default) # 2 SHA1 # 8 SHA256 # 9 SHA384 # 10 SHA512 # #%_source_filedigest_algorithm 1 #%_binary_filedigest_algorithm 1 # Configurable vendor information, same as Vendor: in a specfile. # #%vendor # Default fuzz level for %patch in spec file. %_default_patch_fuzz 0 # Default patch flags #%_default_patch_flags -s #============================================================================== # ---- Build configuration macros. # # Script gets packaged file list on input and buildroot as first parameter. # Returns list of unpackaged files, i.e. files in $RPM_BUILD_ROOT not packaged. # # Note: Disable (by commenting out) for legacy compatibility. %__check_files %{_rpmconfigdir}/check-files %{buildroot} # # Should unpackaged files in a build root terminate a build? # # Note: The default value should be 0 for legacy compatibility. %_unpackaged_files_terminate_build 1 # # Should missing %doc files in the build directory terminate a build? # # Note: The default value should be 0 for legacy compatibility. %_missing_doc_files_terminate_build 1 # # Should binaries in noarch packages terminate a build? %_binaries_in_noarch_packages_terminate_build 1 # # Should rpm try to download missing sources at build-time? # Enabling this is dangerous as long as rpm has no means to validate # the integrity of the download with a digest or signature. %_disable_source_fetch 1 # # Program to call for each successfully built and written binary package. # The package name is passed to the program as a command-line argument. # #%_build_pkgcheck %{_bindir}/rpmlint # # Program to call for the whole binary package set after build. # The package set is passed to the program via command-line arguments. # #%_build_pkgcheck_set %{_bindir}/rpmlint # # Program to call for successfully built and written SRPM. # The package name is passed to the program as a command-line argument. # #%_build_pkgcheck_srpm %{_bindir}/rpmlint # # Should the build of packages fail if package checker (if defined) returns # non-zero exit status? # #%_nonzero_exit_pkgcheck_terminate_build 1 # # Should an ELF file processed by find-debuginfo.sh having no build ID # terminate a build? This is left undefined to disable it and defined to # enable. # #%_missing_build_ids_terminate_build 1 # # Include minimal debug information in build binaries. # Requires _enable_debug_packages. # #%_include_minidebuginfo 1 # # Use internal dependency generator rather than external helpers? %_use_internal_dependency_generator 1 # # Filter GLIBC_PRIVATE Provides: and Requires: %_filter_GLIBC_PRIVATE 0 # Directories whose contents should be considered as documentation. %__docdir_path %{_datadir}/doc:%{_datadir}/man:%{_datadir}/info:%{_datadir}/gtk-doc/html:%{?_docdir}:%{?_mandir}:%{?_infodir}:%{?_javadocdir}:/usr/doc:/usr/man:/usr/info:/usr/X11R6/man # # Path to scripts to autogenerate package dependencies, # # Note: Used iff _use_internal_dependency_generator is zero. #%__find_provides %{_rpmconfigdir}/rpmdeps --provides #%__find_requires %{_rpmconfigdir}/rpmdeps --requires %__find_provides %{_rpmconfigdir}/find-provides %__find_requires %{_rpmconfigdir}/find-requires #%__find_conflicts ??? #%__find_obsoletes ??? # # Path to file attribute classifications for automatic dependency # extraction, used when _use_internal_dependency_generator # is used (on by default). Files can have any number of attributes # attached to them, and dependencies are separately extracted for # each attribute. # # To define a new file attribute called "myattr", add a file named # "myattr" to this directory, defining the requires and/or provides # finder script(s) + magic and/or path pattern regex(es). # provides finder and # %__myattr_requires path + args to requires finder script for <myattr> # %__myattr_provides path + args to provides finder script for <myattr> # %__myattr_magic libmagic classification match regex # %__myattr_path path based classification match regex # %__myattr_flags flags to control behavior (just "exeonly" for now) # %__myattr_exclude_magic exclude by magic regex # %__myattr_exclude_path exclude by path regex # %_fileattrsdir %{_rpmconfigdir}/fileattrs #============================================================================== # ---- Database configuration macros. # Macros used to configure Berkley db parameters. # # rpmdb macro configuration values are a colon (or white space) separated # list of tokens, with an optional '!' negation to explicitly disable bit # values, or a "=value" if a parameter. A per-tag value is used (e.g. # %_dbi_config_Packages) if defined, otherwise a per-rpmdb default # (e.g. %_dbi_config). # # Here's a short list of the tokens, with a guess of whether the option is # useful: # (nothing) currently used in rpm, known to work. # "+++" under development, will be supported in rpm eventually. # "???" I have no clue, you're mostly on your own. # # If you do find yourself inclined to fiddle, here's what I see (shrug): # 1) Only the value of mp_size has any serious impact on overall performance, # and you will need ~256Kb to handle a typical machine install. # 2) Only the Packages hash, because of the size of the values (i.e. headers), # will ever need tuning. Diddle the pagesize if you're interested, although # I believe that you will find pagesize=512 "best". # 3) Adding nofsync increases speed, but risks total data loss. Fiddle shared # and/or mp_size instead. # # token works? Berkeley db flag or value #================================================== #---------------------- DBENV tunable values: # mmapsize=16Mb DBENV->set_mp_mmapsize # cachesize=1Mb DBENV->set_cachesize, DB->set_cachesize #---------------------- DB->open bits: # nommap ??? DB_NOMMAP #----------------------- rpmdb specific configuration: # lockdbfd (always on for Packages) Use fcntl(2) locking ? # nofsync Disable fsync(2) call performed after db3 writes? # # Misc BDB tuning options %__dbi_other mp_mmapsize=128Mb mp_size=1Mb %_dbi_config %{?__dbi_other} # "Packages" should have shared/exclusive fcntl(2) lock using "lockdbfd". %_dbi_config_Packages %{?_dbi_config} lockdbfd #============================================================================== # ---- GPG/PGP/PGP5 signature macros. # Macro(s) to hold the arguments passed to GPG/PGP for package # signing and verification. # %__gpg_check_password_cmd %{__gpg} \ gpg --batch --no-verbose --passphrase-fd 3 -u "%{_gpg_name}" -so - %__gpg_sign_cmd %{__gpg} \ gpg --batch --no-verbose --no-armor --passphrase-fd 3 \ %{?_gpg_digest_algo:--digest-algo %{_gpg_digest_algo}} \ --no-secmem-warning \ -u "%{_gpg_name}" -sbo %{__signature_filename} %{__plaintext_filename} # XXX rpm >= 4.1 verifies signatures internally #%__gpg_verify_cmd %{__gpg} \ # gpg --batch --no-verbose --verify --no-secmem-warning \ # %{__signature_filename} %{__plaintext_filename} # # XXX rpm-4.1 verifies prelinked libraries using a prelink undo helper. # Normally this macro is defined in /etc/rpm/macros.prelink, installed # with the prelink package. If the macro is undefined, then prelinked # shared libraries contents are MD5 digest verified (as usual), rather # than MD5 verifying the output of the prelink undo helper. # # Note: The 2nd token is used as argv[0] and "library" is a # placeholder that will be deleted and replaced with the appropriate # library file path. #%__prelink_undo_cmd /usr/sbin/prelink prelink -y library # Horowitz Key Protocol server configuration # %_hkp_keyserver http://pgp.mit.edu %_hkp_keyserver_query %{_hkp_keyserver}:11371/pks/lookup?op=get&search=0x #============================================================================== # ---- Transaction macros. # Macro(s) used to parameterize transactions. # # The output binary package file name template used when building # binary packages. # # XXX Note: escaped %% for use in headerSprintf() %_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm # Verify digest/signature flags for various rpm modes: # 0x30300 (_RPMVSF_NODIGESTS) --nohdrchk if set, don't check digest(s) # 0xc0c00 (_RPMVSF_NOSIGNATURES) --nosignature if set, don't check signature(s) # 0xf0000 (_RPMVSF_NOPAYLOAD) --nolegacy if set, check header+payload (if possible) # 0x00f00 (_RPMVSF_NOHEADER) --nohdrchk if set, don't check rpmdb headers # # For example, the value 0xf0c00 (=0xf0000+0xc0c00) disables legacy # digest/signature checking, disables signature checking, but attempts # digest checking, also when retrieving headers from the database. # # You also can do: # >>> hex(rpm._RPMVSF_NOSIGNATURES) # '0xc0c00' # or: # >>> hex(rpm._RPMVSF_NOSIGNATURES|rpm._RPMVSF_NOPAYLOAD) # '0xf0c00' # at the python prompt for example, after "import rpm". # # The checking overhead is ~11ms per header for digests/signatures; # each header from the database is checked only when first encountered # for each database open. # # Note: the %_vsflags_erase applies to --upgrade/--freshen modes as # well as --erase. # %__vsflags 0xf0000 %_vsflags_build %{__vsflags} %_vsflags_erase %{__vsflags} %_vsflags_install %{__vsflags} %_vsflags_query %{__vsflags} %_vsflags_rebuilddb 0xc0c00 %_vsflags_verify %{__vsflags} # # Default output format string for rpm -qa # # XXX Note: escaped %% for use in headerFormat() %_query_all_fmt %%{nvra} # # Default path to the file used for transaction fcntl lock. %_rpmlock_path %{_dbpath}/.rpm.lock # # ISA dependency marker, none for noarch and name-bitness for others %_isa %{?__isa:(%{__isa})}%{!?__isa:%{nil}} # # Define per-arch and per-os defaults. Normally overridden by per-target macros. %__arch_install_post %{nil} %__os_install_post %{___build_post} # Macro to fix broken permissions in sources %_fixperms %{__chmod} -Rf a+rX,u+w,g-w,o-w #============================================================================== # ---- Scriptlet template templates. # Global defaults used for building scriptlet templates. # %___build_shell %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh} %___build_args -e %___build_cmd %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args} %___build_pre \ RPM_SOURCE_DIR=\"%{u2p:%{_sourcedir}}\"\ RPM_BUILD_DIR=\"%{u2p:%{_builddir}}\"\ RPM_OPT_FLAGS=\"%{optflags}\"\ RPM_LD_FLAGS=\"%{?__global_ldflags}\"\ RPM_ARCH=\"%{_arch}\"\ RPM_OS=\"%{_os}\"\ export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_LD_FLAGS RPM_ARCH RPM_OS\ RPM_DOC_DIR=\"%{_docdir}\"\ export RPM_DOC_DIR\ RPM_PACKAGE_NAME=\"%{name}\"\ RPM_PACKAGE_VERSION=\"%{version}\"\ RPM_PACKAGE_RELEASE=\"%{release}\"\ export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\ LANG=C\ export LANG\ unset CDPATH DISPLAY ||:\ %{?buildroot:RPM_BUILD_ROOT=\"%{u2p:%{buildroot}}\"\ export RPM_BUILD_ROOT}\ %{?_javaclasspath:CLASSPATH=\"%{_javaclasspath}\"\ export CLASSPATH}\ PKG_CONFIG_PATH=\"${PKG_CONFIG_PATH}:%{_libdir}/pkgconfig:%{_datadir}/pkgconfig\"\ export PKG_CONFIG_PATH\ \ %{verbose:set -x}%{!verbose:exec > /dev/null}\ umask 022\ cd \"%{u2p:%{_builddir}}\"\ #%___build_body %{nil} %___build_post exit 0 %___build_template #!%{___build_shell}\ %{___build_pre}\ %{nil} #%{___build_body}\ #%{___build_post}\ #%{nil} #============================================================================== # ---- Scriptlet templates. # Macro(s) that expand to a command and script that is executed. # CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer. # %__spec_prep_shell %{___build_shell} %__spec_prep_args %{___build_args} %__spec_prep_cmd %{___build_cmd} %__spec_prep_pre %{___build_pre} %__spec_prep_body %{___build_body} %__spec_prep_post %{___build_post} %__spec_prep_template #!%{__spec_prep_shell}\ %{__spec_prep_pre}\ %{nil} #%{__spec_prep_body}\ #%{__spec_prep_post}\ #%{nil} %__spec_build_shell %{___build_shell} %__spec_build_args %{___build_args} %__spec_build_cmd %{___build_cmd} %__spec_build_pre %{___build_pre} %__spec_build_body %{___build_body} %__spec_build_post %{___build_post} %__spec_build_template #!%{__spec_build_shell}\ %{__spec_build_pre}\ %{nil} #%{__spec_build_body}\ #%{__spec_build_post}\ #%{nil} %__spec_install_shell %{___build_shell} %__spec_install_args %{___build_args} %__spec_install_cmd %{___build_cmd} %__spec_install_pre %{___build_pre} %__spec_install_body %{___build_body} %__spec_install_post\ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{nil} %__spec_install_template #!%{__spec_install_shell}\ %{__spec_install_pre}\ %{nil} #%{__spec_install_body}\ #%{__spec_install_post}\ #%{nil} %__spec_check_shell %{___build_shell} %__spec_check_args %{___build_args} %__spec_check_cmd %{___build_cmd} %__spec_check_pre %{___build_pre} %__spec_check_body %{___build_body} %__spec_check_post %{___build_post} %__spec_check_template #!%{__spec_check_shell}\ %{__spec_check_pre}\ %{nil} #%{__spec_check_body}\ #%{__spec_check_post}\ #%{nil} #%__spec_autodep_shell %{___build_shell} #%__spec_autodep_args %{___build_args} #%__spec_autodep_cmd %{___build_cmd} #%__spec_autodep_pre %{___build_pre} #%__spec_autodep_body %{___build_body} #%__spec_autodep_post %{___build_post} #%__spec_autodep_template #!%{__spec_autodep_shell}\ #%{__spec_autodep_pre}\ #%{nil} #%{__spec_autodep_body}\ #%{__spec_autodep_post}\ #%{nil} %__spec_clean_shell %{___build_shell} %__spec_clean_args %{___build_args} %__spec_clean_cmd %{___build_cmd} %__spec_clean_pre %{___build_pre} %__spec_clean_body %{___build_body} %__spec_clean_post %{___build_post} %__spec_clean_template #!%{__spec_clean_shell}\ %{__spec_clean_pre}\ %{nil} #%{__spec_clean_body}\ #%{__spec_clean_post}\ #%{nil} %__spec_rmbuild_shell %{___build_shell} %__spec_rmbuild_args %{___build_args} %__spec_rmbuild_cmd %{___build_cmd} %__spec_rmbuild_pre %{___build_pre} %__spec_rmbuild_body %{___build_body} %__spec_rmbuild_post %{___build_post} %__spec_rmbuild_template #!%{__spec_rmbuild_shell}\ %{__spec_rmbuild_pre}\ %{nil} #%{__spec_rmbuild_body}\ #%{__spec_rmbuild_post}\ #%{nil} # XXX We don't expand pre/post install scriptlets (yet). #%__spec_pre_pre %{nil} #%__spec_pre_post %{nil} #%__spec_post_pre %{nil} #%__spec_post_post %{nil} #%__spec_preun_pre %{nil} #%__spec_preun_post %{nil} #%__spec_postun_pre %{nil} #%__spec_postun_post %{nil} #%__spec_triggerpostun_pre %{nil} #%__spec_triggerpostun_post %{nil} #%__spec_triggerun_pre %{nil} #%__spec_triggerun_post %{nil} #%__spec_triggerin_pre %{nil} #%__spec_triggerin_post %{nil} #============================================================================== # ---- configure macros. # Macro(s) slavishly copied from autoconf's config.status. # %_prefix /usr %_exec_prefix %{_prefix} %_bindir %{_exec_prefix}/bin %_sbindir %{_exec_prefix}/sbin %_libexecdir %{_exec_prefix}/libexec %_datadir %{_prefix}/share %_sysconfdir /etc %_sharedstatedir %{_prefix}/com %_localstatedir %{_prefix}/var %_lib lib %_libdir %{_exec_prefix}/%{_lib} %_includedir %{_prefix}/include %_infodir %{_datadir}/info %_mandir %{_datadir}/man #============================================================================== # ---- config.guess platform macros. # Macro(s) similar to the tokens used by configure. # %_build %{_host} %_build_alias %{_host_alias} %_build_cpu %{_host_cpu} %_build_vendor %{_host_vendor} %_build_os %{_host_os} %_host x86_64-redhat-linux-gnu %_host_alias x86_64-redhat-linux-gnu%{nil} %_host_cpu x86_64 %_host_vendor redhat %_host_os linux %_target %{_host} %_target_alias %{_host_alias} %_target_cpu %{_host_cpu} %_target_vendor %{_host_vendor} %_target_os %{_host_os} #============================================================================== # ---- specfile macros. # Macro(s) here can be used reliably for reproducible builds. # (Note: Above is the goal, below are the macros under development) # # The configure macro runs autoconf configure script with platform specific # directory structure (--prefix, --libdir etc) and compiler flags # such as CFLAGS. # # The configure macro should be invoked as %configure (rather than %{configure}) # because the rest of the arguments will be expanded using %*. # %_configure ./configure %configure \ CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS ; \ CXXFLAGS="${CXXFLAGS:-%optflags}" ; export CXXFLAGS ; \ FFLAGS="${FFLAGS:-%optflags}" ; export FFLAGS ; \ %{_configure} --host=%{_host} --build=%{_build} \\\ --program-prefix=%{?_program_prefix} \\\ --disable-dependency-tracking \\\ --prefix=%{_prefix} \\\ --exec-prefix=%{_exec_prefix} \\\ --bindir=%{_bindir} \\\ --sbindir=%{_sbindir} \\\ --sysconfdir=%{_sysconfdir} \\\ --datadir=%{_datadir} \\\ --includedir=%{_includedir} \\\ --libdir=%{_libdir} \\\ --libexecdir=%{_libexecdir} \\\ --localstatedir=%{_localstatedir} \\\ --sharedstatedir=%{_sharedstatedir} \\\ --mandir=%{_mandir} \\\ --infodir=%{_infodir} #------------------------------------------------------------------------------ # The "make" analogue, hiding the _smp_mflags magic from specs %make_build %{__make} %{?_smp_mflags} #------------------------------------------------------------------------------ # The make install analogue of %configure for modern autotools: %make_install %{__make} install DESTDIR=%{?buildroot} #------------------------------------------------------------------------------ # Former make install analogue, kept for compatibility and for old/broken # packages that don't support DESTDIR properly. %makeinstall \ %{__make} \\\ prefix=%{?buildroot:%{buildroot}}%{_prefix} \\\ exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \\\ bindir=%{?buildroot:%{buildroot}}%{_bindir} \\\ sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \\\ sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \\\ datadir=%{?buildroot:%{buildroot}}%{_datadir} \\\ includedir=%{?buildroot:%{buildroot}}%{_includedir} \\\ libdir=%{?buildroot:%{buildroot}}%{_libdir} \\\ libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \\\ localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \\\ sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \\\ mandir=%{?buildroot:%{buildroot}}%{_mandir} \\\ infodir=%{?buildroot:%{buildroot}}%{_infodir} \\\ install #------------------------------------------------------------------------------ # The GNUconfigure macro does the following: # update config.guess and config.sub. # regenerate all autoconf/automake files # optionally change to a directory (make the directory if requested). # run configure with correct prefix, platform, and CFLAGS. # optionally restore current directory. # # Based on autogen.sh from GNOME and original GNUconfigure # %GNUconfigure(MCs:) \ CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS; \ LDFLAGS="${LDFLAGS:-%{-s:-s}}" ; export LDFLAGS; \ %{-C:_mydir="`pwd`"; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}} \ dirs="`find ${_mydir} -name configure.in -print`"; export dirs; \ for coin in `echo ${dirs}` \ do \ dr=`dirname ${coin}`; \ if test -f ${dr}/NO-AUTO-GEN; then \ : \ else \ macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < ${coin}`; \ ( cd ${dr}; \ aclocalinclude="${ACLOCAL_FLAGS}"; \ for k in ${macrodirs}; do \ if test -d ${k}; then \ aclocalinclude="${aclocalinclude} -I ${k}"; \ ##else \ ## echo "**Warning**: No such directory \`${k}'. Ignored." \ fi \ done \ if grep "^AM_GNU_GETTEXT" configure.in >/dev/null; then \ if grep "sed.*POTFILES" configure.in >/dev/null; then \ : do nothing -- we still have an old unmodified configure.in \ else \ test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4; \ echo "no" | gettextize --force --copy; \ test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4; \ fi \ fi \ if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then \ %{__libtoolize} --force --copy; \ fi \ aclocal ${aclocalinclude}; \ if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then \ %{__autoheader}; \ fi \ echo "Running automake --gnu ${am_opt} ..."; \ %{__automake} --add-missing --gnu ${am_opt}; \ %{__autoconf}; \ ); \ fi \ done \ %{-C:${_mydir}}%{!-C:.}/configure --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ; \ %{-C:cd ${_mydir}; unset _mydir} %patches %{lua: for i, p in ipairs(patches) do print(p.." ") end} %sources %{lua: for i, s in ipairs(sources) do print(s.." ") end} #------------------------------------------------------------------------------ # Useful perl macros (from Artur Frysiak <wiget@t17.ds.pwr.wroc.pl>) # # For example, these can be used as (from ImageMagick.spec from PLD site) # [...] # BuildPrereq: perl # [...] # %package perl # Summary: libraries and modules for access to ImageMagick from perl # Group: Development/Languages/Perl # Requires: %{name} = %{version} # %requires_eq perl # [...] # %install # rm -fr $RPM_BUILD_ROOT # install -d $RPM_BUILD_ROOT/%{perl_sitearch} # [...] # %files perl # %defattr(644,root,root,755) # %{perl_sitearch}/Image # %dir %{perl_sitearch}/auto/Image # %requires_eq() %(LC_ALL="C" echo '%*' | xargs -r rpm -q --qf 'Requires: %%{name} = %%{epoch}:%%{version}\\n' | sed -e 's/ (none):/ /' -e 's/ 0:/ /' | grep -v "is not") %perl_sitearch %(eval "`%{__perl} -V:installsitearch`"; echo $installsitearch) %perl_sitelib %(eval "`%{__perl} -V:installsitelib`"; echo $installsitelib) %perl_vendorarch %(eval "`%{__perl} -V:installvendorarch`"; echo $installvendorarch) %perl_vendorlib %(eval "`%{__perl} -V:installvendorlib`"; echo $installvendorlib) %perl_archlib %(eval "`%{__perl} -V:installarchlib`"; echo $installarchlib) %perl_privlib %(eval "`%{__perl} -V:installprivlib`"; echo $installprivlib) #------------------------------------------------------------------------------ # Useful python macros for determining python version and paths # %python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib())") %python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib(1))") %python_version %(%{__python} -c "import sys; sys.stdout.write(sys.version[:3])") #------------------------------------------------------------------------------ # arch macro for all Intel i?86 compatibile processors # (Note: This macro (and it's analogues) will probably be obsoleted when # rpm can use regular expressions against target platforms in macro # conditionals. # %ix86 i386 i486 i586 i686 pentium3 pentium4 athlon geode #------------------------------------------------------------------------------ # arch macro for all supported ARM processors %arm armv3l armv4b armv4l armv4tl armv5tel armv5tejl armv6l armv7l armv7hl armv7hnl #------------------------------------------------------------------------------ # arch macro for all supported Sparc processors %sparc sparc sparcv8 sparcv9 sparcv9v sparc64 sparc64v #------------------------------------------------------------------------------ # arch macro for all supported Alpha processors %alpha alpha alphaev56 alphaev6 alphaev67 #------------------------------------------------------------------------------ # arch macro for all supported PowerPC 64 processors %power64 ppc64 ppc64p7 ppc64le #------------------------------------------------------------------------ # Use in %install to generate locale specific file lists. For example, # # %install # ... # %find_lang %{name} # ... # %files -f %{name}.lang # %find_lang %{_rpmconfigdir}/find-lang.sh %{buildroot} # Commands + opts to use for retrieving remote files # Proxy opts can be set through --httpproxy/--httpport popt aliases, # for any special local needs use %__urlhelper_localopts in system-wide # or per-user macro configuration. %__urlhelpercmd /usr/bin/curl %__urlhelperopts --silent --show-error --fail --globoff --location -o %__urlhelper_proxyopts %{?_httpproxy:--proxy %{_httpproxy}%{?_httpport::%{_httpport}}}%{!?_httpproxy:%{nil}} %_urlhelper %{__urlhelpercmd} %{?__urlhelper_localopts} %{?__urlhelper_proxyopts} %{__urlhelperopts} #------------------------------------------------------------------------------ # Collection specific macros %__plugindir %{_libdir}/rpm-plugins # %__collection_font %{__plugindir}/exec.so /usr/bin/fc-cache # %__collection_java %{__plugindir}/exec.so /usr/bin/rebuild-gcj-db # %__collection_sepolicy %{__plugindir}/sepolicy.so # %__collection_sepolicy_flags 1 # Transaction plugin macros %__transaction_systemd_inhibit %{__plugindir}/systemd_inhibit.so #------------------------------------------------------------------------------ # Macros for further automated spec %setup and patch application # default to plain patch %__scm patch # meh, figure something saner %__scm_username rpm-build %__scm_usermail <rpm-build> %__scm_author %{__scm_username} %{__scm_usermail} # Plain patch (-m is unused) %__scm_setup_patch(q) %{nil} %__scm_apply_patch(qp:m:)\ %{__patch} %{-p:-p%{-p*}} %{-q:-s} # Mercurial (aka hg) %__scm_setup_hg(q)\ %{__hg} init %{-q} .\ %{__hg} add %{-q} .\ %{__hg} commit %{-q} --user "%{__scm_author}" -m "%{name}-%{version} base" %__scm_apply_hg(qp:m:)\ %{__hg} import - %{-p:-p%{-p*}} %{-q} -m %{-m*} --user "%{__scm_author}" # Git %__scm_setup_git(q)\ %{__git} init %{-q}\ %{__git} config user.name "%{__scm_username}"\ %{__git} config user.email "%{__scm_usermail}"\ %{__git} add .\ %{__git} commit %{-q} -a\\\ --author "%{__scm_author}" -m "%{name}-%{version} base" %__scm_apply_git(qp:m:)\ %{__git} apply --index %{-p:-p%{-p*}} -\ %{__git} commit %{-q} -m %{-m*} --author "%{__scm_author}" # Git, using "git am" (-m is unused) %__scm_setup_git_am(q)\ %{expand:%__scm_setup_git %{-q}} %__scm_apply_git_am(qp:m:)\ %{__git} am %{-q} %{-p:-p%{-p*}} # Quilt %__scm_setup_quilt(q) %{nil} %__scm_apply_quilt(qp:m:)\ %{__quilt} import %{-p:-p%{-p*}} %{1} && %{__quilt} push # Bzr %__scm_setup_bzr(q)\ %{__bzr} init %{-q}\ %{__bzr} whoami --branch "%{__scm_author}"\ %{__bzr} add .\ %{__bzr} commit %{-q} -m "%{name}-%{version} base" # bzr doesn't seem to have its own command to apply patches? %__scm_apply_bzr(qp:m:)\ %{__patch} %{-p:-p%{-p*}} %{-q:-s}\ %{__bzr} commit %{-q} -m %{-m*} # Single patch application %apply_patch(qp:m:)\ %{uncompress:%{1}} | %{expand:%__scm_apply_%{__scm} %{-q} %{-p:-p%{-p*}} %{-m:-m%{-m*}}} # Automatically apply all patches %autopatch(vp:)\ %{lua:\ local options = rpm.expand("%{!-v:-q} %{-p:-p%{-p*}} ")\ for i, p in ipairs(patches) do\ print(rpm.expand("%apply_patch -m %{basename:"..p.."} "..options..p.."\\n"))\ end} # One macro to (optionally) do it all. # -S<scm name> Sets the used patch application style, eg '-S git' enables # usage of git repository and per-patch commits. # -N Disable automatic patch application # -p<num> Use -p<num> for patch application %autosetup(a:b:cDn:TvNS:p:)\ %setup %{-a} %{-b} %{-c} %{-D} %{-n} %{-T} %{!-v:-q}\ %{-S:%global __scm %{-S*}}\ %{-S:%{expand:%__scm_setup_%{-S*} %{!-v:-q}}}\ %{!-N:%autopatch %{-v} %{-p:-p%{-p*}}} # \endverbatim #*/
./LuLlaby007 ♥ Tata Cantik - Copyright 2k18